IP 401: Liquefied petroleum gases - detection of hydrogen sulfide- Lead acetate method

Document options


EI Technical Partners get free access to publications. You will need to Login or Register here

  • Method adopted/last revised: 1995
  • Method reapproved: 2014
  • REF/ISBN: IP401-2939444
  • Status: Current
  • First printed in STM books: February 1995

Scope

This International Standard specifies a method for the detection of hydrogen sulfide in liquefied petroleum gases.
The lower limit of detectability is 4 mg of hydrogen sulfide in 1 m3 of liquefied petroleum gas. Methyl mercaptan, if present, produces a transitory yellow stain on lead acetate paper which, however, fades completely in less than 5 min. Other sulfur compounds present in liquefied petroleum gas do not interfere with the test.

NOTE 1 Liquefied petroleum gases and the products of their combustion should not be unduly corrosive or reactive to materials with which they come into contact. It is therefore important that the presence of any hydrogen sulfide, a highly reactive substance, be detected. Additionally, the odour of hydrogen sulfide is unacceptable in some applications of liquefied petroleum gases (e.g. lighter fuel).

Members Benefits

Are you an EI Member? If yes, register/log in now to ensure you receive free access or discounts to EI publications.

If you are not a Member, why not join today and receive all of the benefits of EI Membership? EI Members are entitled to a 25% discount on most EI publications.