IP PM EV: Crude Oil — Determination of sulfur content — Energy-dispersive X-ray fluorescence spectrometry

Document options


EI Technical Partners get free access to publications. You will need to Login or Register here

  • Method adopted/last revised:
  • Method reapproved: None
  • REF/ISBN: IPPMEV2939444
  • Status: New
  • First printed in STM books: February 2017

Scope

This standard specifies a method for the determination of the sulfur content in crude oil. The method is applicable to crude oil having sulfur contents in the range 0,005 % (m/m) to 5,00 % (m/m). Higher contents can be determined by appropriate dilution.

NOTE – For the purposes of this International Standard, the term “% (m/m)” is used to represent the mass fraction of a material. High concentrations of phosphorus and lead alkyl (typically above 3 % (m/m) can cause, bias in the sulphur result by absorbing Zr-La and S-Ka to different extents. For crude with a pour point above ambient temperature, gentle heating may be required to mobilise the sample. Care should be taken to avoid loss of light ends. The sample may need reheating after settling.

Members Benefits

Are you an EI Member? If yes, register/log in now to ensure you receive free access or discounts to EI publications.

If you are not a Member, why not join today and receive all of the benefits of EI Membership? EI Members are entitled to a 25% discount on most EI publications.