IP 618: Determination of cold filter blocking tendency

Document options

EI Technical Partners get free access to publications. You will need to Login or Register here

  • Method adopted/last revised: 2016
  • Method reapproved: None
  • REF/ISBN: IP618-2939444
  • Status: New
  • First printed in STM books: November 2016


This standard specifies a method for the determination of the cold filter blocking tendency (CFBT) and cold filterability of middle distillate fuel oils containing biodiesel from 0 % to 20 %, at temperatures between ambient and -5 °C where the end use demands an exceptional degree of cleanliness. The method is applicable to fluids within the viscosity range of 1,2 mm2/s to 6,0 mm2/s at 40 °C. A change in filtration performance after storage or pre-treatment, such as cold soaking, can be used to indicate potential filter blocking problems or small changes in fuel condition. Appendix C describes an optional cold soak procedure. The standard test operating temperatures are 3 °C and -1 °C.

NOTE — Test temperatures below the cloud point of the sample are not advised and can produce erratic results.

Members Benefits

Are you an EI Member? If yes, register/log in now to ensure you receive free access or discounts to EI publications.

If you are not a Member, why not join today and receive all of the benefits of EI Membership? EI Members are entitled to a 25% discount on most EI publications.