HM 2. Tank calibration. Section 1: Strapping, internal diameter and internal offset methods for the calibration of vertical cylindrical tanks

Document options

EI Technical Partners get free access to publications. You will need to Login or Register here

  • Published: September 2000
  • REF/ISBN: 9780852932285
  • Edition: 1st
  • Status: Current

The static measurement of bulk quantities of oil stored in tanks is dependent on the calibration of the tanks. Any errors made in the calibration and any systematic errors in tank calibration tables may result in very large cumulative losses or gains throughout the long period of time in which the tables remain in force.

This Hydrocarbon Management document details three calibration methods that have been drawn up to provide an accuracy consistent with the most stringent requirements and the procedures and equipment described represent the minimum requirements to achieve an acceptable level of measurement uncertainty. The three methods that are described are calibration by strapping (which is the measurement of external circumference using a strapping tape), calibration by direct measurement of the internal diameter of the tank using a tape and calibration by measurement of internal diameter using an offset measurement method. These methods are for tanks having cylindrical courses that are substantially vertical and it is assumed that any deformation of the tank is within limits set by recognised National or International Construction Standards.

This measurement document has been prepared for international use and provides vital information for all those involved with the calibration of vertical cylindrical tanks.

Members Benefits

Are you an EI Member? If yes, register/log in now to ensure you receive free access or discounts to EI publications.

If you are not a Member, why not join today and receive all of the benefits of EI Membership? EI Members are entitled to a 25% discount on most EI publications.