IP 561: Determination of silicon, chromium, copper, nickel and iron in used grease - Inductively coupled plasma atomic emission spectroscopy (ICP-AES) method

Document options


EI Technical Partners get free access to publications. You will need to Login or Register here

  • Method adopted/last revised: 2008
  • Method reapproved: None
  • REF/ISBN: IP561-2936450
  • Status: Current
  • First printed in STM books: January 2008
  • -->

Scope

This Standard specifies a procedure for the determination of silicon, nickel, chromium, iron and copper content of used lubricating greases by inductively coupled plasma atomic emission spectrophotometry (ICP-AES). The concentration ranges that this method covers are shown below:

Element      Range mg/kg

Silicon          14 to 240
Nickel            3 to 180
Chromium     1 to 160
Iron               7 to 2880
Copper          2 to 132

NOTE 1 - This standard is designed for trend analysis of the elements listed. The precision shown for each element obtained from a round robin study is supplied to provide indicative performance on repeatability and reproducibility. Due to the inhomogeneous nature of the samples a high variance can be expected thus individual measurements should not be used in isolation but as a measure of trend.

NOTE 2 - Results obtained from XRF determinations of the same round robin samples indicated that ICP-AES measurements produced lower results for all elements except Fe where the results were comparable.

Members Benefits

Are you an EI Member? If yes, register/log in now to ensure you receive free access or discounts to EI publications.

If you are not a Member, why not join today and receive all of the benefits of EI Membership? EI Members are entitled to a 25% discount on most EI publications.