HM 18. Meter Proving. Section 10: Recommended UK operational practice for proving turbine meters in loading gantries

Document options

EI Technical Partners get free access to publications. You will need to Login or Register here

Dear customer,

As a result of the ongoing pandemic, our distributors are working at reduced capacity. Please be aware that this may introduce some delays to the delivery of hard copy orders. If you have queries about the status of your order, please contact with your order number, and the Publications team will reply ASAP.

Thank you for your patience,
EI Publications

  • Published: July 2001
  • REF/ISBN: 9780852933442
  • Edition: 1st
  • Status: Current

To ensure that a gantry meter is reading accurately and to comply with regulations, it is necessary to carry out periodically a test or series of tests in which the meter's readings are compared with proving equipment that is traceable to national standards. A primary objective of this publication is to promote uniformity and consistency both in the proving of gantry meters and in the interpretation of the results.

This publication describes procedures applicable to turbine gantry meters (road and rail) and proved by reference meter or volumetric proving tank. Many of the procedures are identical to those employed for proving positive displacement meters, but where turbine meters require particular attention, the details are given.

Formerly PMM Part X, S10

Members Benefits

Are you an EI Member? If yes, register/log in now to ensure you receive free access or discounts to EI publications.

If you are not a Member, why not join today and receive all of the benefits of EI Membership? EI Members are entitled to a 25% discount on most EI publications.